Baymak Jet 112-20LT Horizontal-Tank Booster Pump, 6 Floors, 6 Apartments
$554.21 $738.94 · In stock
Brand: Baymak · SKU: JET112-20LT-01050058 · Warranty: 24 months
Other options
- Baymak Jet 82-20LT Booster Pump, Horizontal Tank, 3 Floors, 4 Apartments – $427.04
- Baymak Jetinox 82-20LT Stainless Steel Horizontal Tank Booster Pump, 3 Floors, 4 Apartments – $486.02
- Baymak Jet 82-50LT Booster Pump, Horizontal Tank, 3 Floors, 4 Units – $570.17
- Baymak Jetinox 82-50LT Stainless Steel Horizontal-Tank Booster Pump, 3 Floors, 4 Units – $613.18
- Baymak Jet 102-20LT Booster Pump with Horizontal Tank, 4 Floors, 5 Units – $457.58
- Baymak Jetinox 102-20LT Stainless Steel Horizontal-Tank Booster Pump, 4-Floor 5-Apartment – $499.34
- Baymak Jet 102-50LT Horizontal Tank Booster Pump, 4 Floors, 5 Apartments – $608.30
- Baymak Jetinox 102-50LT Booster Pump, Stainless Steel Casing, Horizontal Tank, 4 Floors, 5 Units (out of stock)
- Baymak Jetinox 112-20LT Horizontal Tank Booster Pump, 6 Floors, 6 Apartments – $512.95
- Baymak Jet 112-50LT Horizontal Tank Booster Pump, 6 Floors, 6 Apartments (out of stock)
- Baymak Jetinox 112-50LT Booster Pump, Horizontal Tank, 6 Floors, 6 Apartments (out of stock)
- Baymak Jet 151-50LT Horizontal Tank Booster Pump, 6 Floors, 12 Apartments – $1,000.86
- Baymak Jet 251-50LT Booster Pump, Horizontal Tank, 6 Floors, 18 Units (out of stock)
Product description
Covered by a 2-year Baymak warranty.
For warranty purposes, you must request free commissioning from Baymak.
Baymak Jet 112-20LT Horizontal-Tank Booster Pump Features
- The original DAB is cast iron. It is shipped ready in its packaging.
- Can draw suction from depths of up to 8 meters. (Capacity varies depending on suction depth.)
- The flexible pipe is short, so it takes up less space.
- The tank does not rust because it does not come into contact with water and has an oven-painted finish.
- Shipped with a 1-meter plug-in cable.
- A float switch is included, connected to the unit.
Baymak Jet 112-20LT Technical Specifications
- Mechanical Seal: Carbon / Ceramic / NBR
- Impeller Material: Technopolymer
- Pump Casing: Cast Iron
- Pump Shaft: Stainless Steel
- Venturi, Diffuser: Technopolymer
- Protection Class: IP 44
- Insulation Class: F
- Max. Fluid Temperature: +40 °C
- Max. Operating Pressure Rating: 8 Bar
- Operating Pressure Range: 3.5–5 Bar
- Connection Size: 1" / 1"
- Motor Power: 1.5 HP / 1.1 kW
- Total Weight: 24 kg
- Voltage: 220 V
| A(mm) | B(mm) | C(mm) | D(mm) | E(mm) | F(mm) | H(mm) |
| 560 | 270 | 425 | 510 | 250 | 245 | 560 |
Baymak Jet 112-20LT Important Notes
- Baymak booster pump initial start-up must be carried out by an authorized Baymak service center. Otherwise, the warranty will be void.
- Transport the Baymak Jet 112-20LT only in its original packaging, observing all warnings printed on the box.
- For installation of the Baymak Jet 112-20LT, it is recommended to draw suction at least 30 cm above the bottom of the tank to prevent foreign matter in the water (sand, etc.) from damaging the unit.
- The Baymak booster pump must not be connected to draw directly from the city mains; it must draw from a storage tank.
- Do not interfere with the expansion vessel valve; it is charged with compressed air when there is no water in the pump.
- The pressure switch has been factory-set; do not make any adjustments.
- It is recommended to install the Baymak booster pump in a well-ventilated location where the temperature does not exceed 40 °C.
- Install the suction and discharge pipes with clamps so that the load is transferred to the wall.
- If the Baymak Jet 112-20LT fails to start after a period of inactivity, loosen the shaft at the rear of the motor.
- If the water inside the unit is to be completely drained, this must be done in an environment below 0 °C. If the unit will not be used for an extended period, draining is recommended to prevent internal corrosion.
- Fit a switch proportional to the current, observing the information on the Baymak Jet 112-20LT label.
- Under no circumstances allow anyone other than authorized service personnel to work on the unit.
- For the installation piping: if metal pipe is used, the inlet/outlet diameters must be the same; if plastic pipe is used, the next size up should be selected.
- The suction line should be as short as possible (maximum 6 m) and made with the fewest possible fittings.
- Never run the Baymak Jet 112-20LT dry. Otherwise the mechanical seal, impeller and electric motor will burn out and the warranty will be void.
- We recommend using the Baymak Jet 112-20LT with a protection panel against electrical faults.
Specifications
| Brand | Baymak |
|---|---|
| Number of Floors | 6 Floors |
| Number of Apartments | 6 Apartments |
Similar products
Water Sound GP2624 Automatic Booster Pump, 24V, 150W, Caravan & Boat – $255.93
Water Sound GP2612 Automatic Booster Pump, 12V, 150W, Caravan & Boat – $255.93
Hidrotank TD 50 Vertical Pressure Tank, 50 L, 1″ Connection – $109.61
İKRAHİDRO-11H 1 Floor 1 Apartment Booster Pump with Pressure Switch – $121.96
Seaflo Automatic Booster Pump, 12V, 24 L Tank, Boat, Yacht & Caravan – $344.79
Cacheng Low-Noise Automatic Mains Pressure Booster Pump, 42 L/min, 3 Bar – $240.00
Low-Noise Booster Pump, 24V, Boat, Yacht & Caravan, 25 L/min, 2 Bar – $144.51
Hidrotank Globe Booster Pump Kit with Connection Set, 24 L – $121.96
Forza TGP 130 Automatic Water Booster Pump, 3.5 Bar – $94.97
Nano Water Filter, 1 Inch – $195.73